Layering Glitter and Metallic Paints to Create Paperweights with Sparkling Borders

This is the second post in my series on painting PhotoWeights to achieve a variety of different looks for your glass paperweights.

In my first post, Add a Little Color to Your Paperweights with Enamel Paint, I started with a simple project that involved a single color.  Today I'll be using two different paints; a clear paint with flecks of glitter and a metallic paint.  I love the result when these are layered.

As I mentioned in my previous post, I recommend Plaid's line of FolkArt Enamels designed specifically for glass and ceramics.  A 2oz bottle sells for around $1.99.  They're available in most craft stores.

I'm using a glitter paint (FolkArt, 2798 Gold) and a metallic (FolkArt, 4129 Metallic Gold).

Remember to follow the instructions for the particular paint you're using. Also, before you begin, be sure to thoroughly clean your paperweight.

I started by applying a coat of glitter paint to the bottom surface of one of our Scalloped Paperweight Kits.  The glitter paint went on cloudy and dried clear.

Tip: As you're painting, keep a few slightly damp cotton swabs on hand to clean up your lines and wipe away any small mistakes.

After the glitter paint dried for an hour, I brushed on a coat of metallic, gold paint.  As you can see in the photo above, the metallic paint appears semi-transparent in some areas.  Another coat of metallic paint should give you complete coverage.

After the previous coat dried for an hour, I brushed on the second coat of metallic paint.

When you look at the paint through the top of the paperweight, the glitter sparkles against the metallic background.


CURE TIME

FolkArt enamel paints have a recommended cure time to make the paint top-rack, dishwasher safe.  It also makes the paint more durable.

The cure time for the paint I used is 21 days if you're air drying.  If you're like me, and you're not that patient, you can air dry the paint for one hour before baking it in the oven.

To cure the paint in the oven, I set the paperweight on a metal cookie sheet, placed it in a cold oven, and set the temperature to 350F.  After the oven reached temperature, I set my timer for 30-minutes.  When the time was up, I turned the heat off and allowed the paperweight to cool in the oven before I removed it.

Be sure to follow the instructions for the particular paint you're using.

After the paint has cured, you can personalize your paperweight as your normally would.  The self-adhesive bottom pad can be adhered directly to the painted rim.

Add a Little Color to Your Paperweights With Enamel Paint

Applying paint to the underside of your paperweights can change the appearance of your finished design entirely.  You can paint the glass to coordinate with the decor of your office.  You can also choose a color that compliments the artwork or photograph being captured.

Painting your paperweights can be as simple and straightforward as using a single color, like the example pictured above.  You can also use decorative painting techniques to achieve specific looks.

My next few blog posts will show you several examples of how you can use paint with PhotoWeights.

I recommend Plaid's line of FolkArt Enamels designed specifically for glass and ceramics.  These are available in most craft stores and sell for around $1.99 for a 2oz bottle.

I'm going to start with a simple project that involves a single shade of paint applied to our Elegant Oval Paperweight Kit.  The color is Lime Green (Plaid FolkArt Enamels 4138E). Although this paint has excellent coverage, you should plan to do this in no fewer than two coats with one hour of dry time in between.  The number of coats required will vary by paint brand and color.

As you're painting, keep a few slightly damp cotton swabs on hand to clean up your lines and wipe away small mistakes.

Remember to follow the instructions for the particular paint you're using.  Also, be sure to thoroughly clean your paperweight before you begin.

The first coat of paint (shown above) should be applied evenly to ensure you've covered all areas of the glass.  If you look closely (click the image to enlarge), you can see the paint appears semi-transparent in some areas.  This is perfectly fine.

This first coat is what will be visible through the top surface of the paperweight, so turn it over occasionally to check your work for air bubbles and skipped spots.  Wait one hour before applying a second coat, or according to your paint's directions.

The second layer of paint should give you full coverage.  If any spots need to be touched up, this can be done when the paint is mostly dry.

The photo above shows how the paint will appear when viewed through the paperweight.


CURE TIME

FolkArt enamel paints have a recommended cure time to make the paint top-rack, dishwasher safe.  Although you're probably not going to run your paperweights through the dishwasher, I cure my paint because it makes it more durable.

The cure time for the paint I used is 21 days if you're air drying.  You can also use the method I prefer which is to air dry for 1 hour before baking it in the oven.

To cure the paint in the oven, I set the paperweight on a metal cookie sheet, placed it in a cold oven, and set the temperature to 350F.  After the oven reached temperature, I set my timer for 30-minutes.  After a half-hour, I turned the heat off and allowed the paperweight to cool in the oven before I removed it.

Be sure to follow the instructions for the particular paint you're using.

After the paint has cured, you can personalize your paperweight as you normally would.  The self-adhesive bottom pad can be adhered directly to the painted rim.